Rtintâ„¢ Ford F150 20152020 (4 Door Super Crew) Window Tint Kit DIY from www.rvinyl.com
If you're looking to improve the look of your F150 truck, window tinting is a great place to start. Window tinting not only enhances the appearance of your vehicle, but it also provides several practical benefits such as reducing heat, glare, and UV radiation. In this article, we'll guide you through the process of DIY F150 window tinting.
What is Window Tinting?
Window tinting is the process of applying a thin film to the windows of your vehicle. This film is typically made of polyester and is available in various shades of darkness. The film is applied to the inside of the window and is held in place by an adhesive. The adhesive is activated by heat, allowing the film to conform to the shape of the window.
Why Tint Your F150 Windows?
There are several reasons why you might want to tint your F150 windows. Here are some of the most common benefits of window tinting:
Reduced Heat
Window tinting can significantly reduce the amount of heat that enters your vehicle. This can help keep you and your passengers more comfortable, especially on hot summer days.
Reduced Glare
Tinted windows can also help reduce glare from the sun, headlights, and other sources. This can make it easier to see while driving and can reduce eye strain.
UV Protection
Window tinting can block up to 99% of UV radiation from the sun. This can help protect your skin and eyes from damage and can also help prevent fading and damage to your vehicle's interior.
Enhanced Privacy
Tinted windows can also provide enhanced privacy by making it more difficult for people to see into your vehicle. This can be especially useful if you often park in public places or if you carry valuable items in your vehicle.
DIY F150 Window Tinting: Step by Step Guide
Now that you know the benefits of window tinting, let's take a look at how to do it yourself.
Step 1: Gather Your Materials
Before you begin, you'll need to gather a few materials:
Window tint film
Spray bottle filled with water and a few drops of dish soap
Squeegee
Razor blade or sharp knife
Microfiber cloth
Heat gun or hair dryer
Step 2: Prep Your Windows
Start by cleaning the windows you want to tint. Use a glass cleaner and a microfiber cloth to remove any dirt, dust, or grime. Next, use the spray bottle to wet the window with the water and dish soap solution. This will help the tint film adhere to the window.
Step 3: Cut Your Tint Film
Now it's time to cut your tint film to the size of your window. Lay the film over the window and use a razor blade or sharp knife to cut it to size. Make sure to leave a little bit of extra film around the edges so that you can trim it later.
Step 4: Apply the Tint Film
Peel the backing off the tint film and spray the adhesive side with the water and dish soap solution. Next, carefully place the film onto the window, making sure to align it properly. Use the squeegee to press out any air bubbles and to smooth out the film.
Step 5: Trim the Excess Film
Use a razor blade or sharp knife to trim the excess film from around the edges of the window. Be sure to trim carefully so that you don't damage the film.
Step 6: Heat the Film
Use a heat gun or hair dryer to heat the film. This will help it conform to the shape of the window and will also help to activate the adhesive. Be careful not to overheat the film, as this can cause it to warp or bubble.
Step 7: Finish Up
Once the film is heated and in place, use the squeegee to smooth out any remaining air bubbles. Use a microfiber cloth to clean up any excess water or soap solution. Allow the film to dry for at least 24 hours before rolling down the window.
Tips for DIY F150 Window Tinting
Here are a few tips to keep in mind as you tackle your DIY F150 window tinting project:
Work in a clean, dust-free environment to avoid dust and dirt getting trapped under the film.
Be patient and take your time. Rushing can lead to mistakes and poor results.
Use plenty of water and soap solution to help the film adhere to the window.
Be careful not to damage the film when trimming the excess.
Don't roll down your windows for at least 24 hours after installation to allow the film to dry and set properly.
Conclusion
Window tinting is a great way to improve the look and functionality of your F150 truck. With a little bit of patience and the right materials, you can tackle this DIY project on your own. Follow the steps outlined in this article and you'll be enjoying your newly tinted windows in no time.
